{"title":"Gifts up to €30","description":"\u003cp\u003eGift ideas up to €30: acrylic shields for compact gear like pedals, tuners and MIDI controllers. Handmade in Bavaria.\u003c\/p\u003e","products":[{"product_id":"ampero-2-stomp-shield","title":"Hotone Ampero 2 Stomp Acrylic Cover \u0026 Protective Shield","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Hotone Ampero 2 Stomp.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ampero 2 Stomp packs a lot into a small footprint, which is exactly why its screen and controls are worth protecting. This hard acrylic shield helps protect them from scratches and knocks, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the Ampero 2 Stomp, not stretched from a universal template. Every knob and button lines up, and the display stays clear, so the touchscreen keeps working through the guard.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e all buttons, knobs and the touchscreen display stay fully usable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Hotone Ampero 2 Stomp, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard protection:\u003c\/strong\u003e rigid acrylic against scratches and impacts, not a soft sleeve or a peel-off film.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWork only in the editor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run your Ampero 2 Stomp exclusively from the editor, we also make a version that covers the display for extra protection. Just leave a note with your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Hotone Ampero 2 Stomp\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":54584828821833,"sku":"PYG-A2ST","price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/ampero-2-stomp--HAUPTBILD.jpg?v=1788653005"},{"product_id":"morningstar-mc6-pro-protector","title":"Morningstar MC6 Pro Acrylic Cover \u0026 Screen Protector","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Morningstar MC6 Pro.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour MC6 Pro is the brain of your rig, so its buttons and surface are worth protecting. This hard acrylic shield helps protect them from scratches and knocks, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the Morningstar MC6 Pro, not stretched from a universal template. Every button and knob lines up, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this shield fits the \u003cstrong\u003eMC6 Pro\u003c\/strong\u003e only. It is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the standard Morningstar MC6.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e all buttons and knobs stay fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Morningstar MC6 Pro, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard protection:\u003c\/strong\u003e rigid acrylic against scratches and impacts, not a soft sleeve or a peel-off film.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Morningstar MC6 Pro\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":54584828854601,"sku":"PYG-MC6","price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/mc6-pro--HAUPTBILD.jpg?v=1788653041"},{"product_id":"line6-hx-stomp-shield","title":"Line 6 HX Stomp Acrylic Cover \u0026 Protective Shield","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Line 6 HX Stomp.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HX Stomp packs a full rig into a tiny box, which is exactly why its knobs and footswitches take a beating. This hard acrylic shield helps protect them from scratches and knocks, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the HX Stomp, not stretched from a universal template. Every knob and footswitch lines up, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTwo parts, both included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUpper shield:\u003c\/strong\u003e covers the top section with the display and knobs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLower shield:\u003c\/strong\u003e covers the footswitch area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou get both parts, so the whole top surface is covered.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e all knobs and footswitches stay fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Line 6 HX Stomp, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCompatible with the PYG Footswitch Extender (coming soon).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x upper shield and 1x lower shield for the Line 6 HX Stomp\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":54584829051209,"sku":"PYG-HXS-SET","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/il_fullxfull.6147061311_rjco.jpg?v=1781229975"},{"product_id":"neural-dsp-nanocortex-shield","title":"Neural DSP Nano Cortex Acrylic Cover \u0026 Protective Shield","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Neural DSP Nano Cortex.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nano Cortex fits a lot of tone into a small box, and that small surface is worth protecting. This hard acrylic shield helps protect its knobs and face from scratches and knocks, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the Neural DSP Nano Cortex, not stretched from a universal template. Every knob and button lines up, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e all knobs and buttons stay fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Neural DSP Nano Cortex, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard protection:\u003c\/strong\u003e rigid acrylic against scratches and impacts, not a soft sleeve or a peel-off film.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Neural DSP Nano Cortex\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":54584829215049,"sku":"PYG-NCX","price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/nanocortex--HAUPTBILD.jpg?v=1788652978"},{"product_id":"peterson-strobostomp-shield","title":"Peterson StroboStomp Acrylic Cover \u0026 Protective Shield","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Peterson StroboStomp.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe StroboStomp lives on the floor and takes the hits that come with it. This hard acrylic shield helps protect its display and surface from scratches and scuffs, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the Peterson StroboStomp, not stretched from a universal template. It lines up around the screen and the footswitch, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e the footswitch stays fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Peterson StroboStomp, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard protection:\u003c\/strong\u003e rigid acrylic against scratches and impacts, not a soft sleeve or a peel-off film.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Peterson StroboStomp\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":54584829444425,"sku":"PYG-PSS","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/strobostomp--HAUPTBILD.jpg?v=1788653059"},{"product_id":"line6-hx-stomp-xl-shield","title":"Line 6 HX Stomp XL Acrylic Cover \u0026 Protective Shield","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Line 6 HX Stomp XL.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HX Stomp XL gives you more switches to work with, and more surface to keep safe. This hard acrylic shield helps guard its display, knobs and footswitches against scratches and knocks, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the HX Stomp XL, not stretched from a universal template. Every knob and footswitch lines up, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTwo options, choose your coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControl shield:\u003c\/strong\u003e fits the display and knob section.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Set:\u003c\/strong\u003e protects all surfaces of the HX Stomp XL.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e all knobs and footswitches stay fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Line 6 HX Stomp XL, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Line 6 HX Stomp XL (in your selected version)\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Full Set","offer_id":54584829477193,"sku":"PYG-HXXL-SET","price":32.0,"currency_code":"EUR","in_stock":true},{"title":"Only Control Shield","offer_id":54584829509961,"sku":"PYG-HXXL-CTL","price":14.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/hx-stomp-xl--HAUPTBILD.jpg?v=1788652997"},{"product_id":"dimehead-nam-player-screen-protector","title":"Dimehead NAM Player Acrylic Cover \u0026 Screen Protector","description":"\u003cp\u003e\u003cstrong\u003eDimehead NAM Player display protection, rugged acrylic guard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProtect your equipment with our precision-fit Dimehead NAM Player protector. Developed specifically for the NAM Player, this crystal-clear acrylic guard helps protect your high-end amp modeler from scratches, even through intense live shows and studio sessions. Unlike thin plastic films, our hard acrylic shield helps protect against scratches and knocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy our protector?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull functionality:\u003c\/strong\u003e all knobs and switches remain fully usable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged and tour-ready:\u003c\/strong\u003e built for life on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e high-quality self-adhesive feet, designed to come off without residue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Dimehead NAM Player (no universal sizing).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x acrylic protector\u003c\/li\u003e\n\u003cli\u003eAdditional set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eNote: this is a rigid acrylic guard, not a soft silicone sleeve, not a vinyl sticker and not a padded bag. It serves as hardware protection for the device and is not a full carrying case or a replacement screen.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":55046078857545,"sku":"PYG-NAM","price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/il_fullxfull.8369478600_3vqu.jpg?v=1786548599"},{"product_id":"peterson-strobostomp-mini-shield","title":"Peterson StroboStomp Mini Acrylic Cover \u0026 Protective Shield","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Peterson StroboStomp Mini.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe StroboStomp Mini sits on the floor and takes the hits that come with it. This hard acrylic shield helps protect its display and surface from scratches and scuffs, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard that can take a knock.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the Peterson StroboStomp Mini, not stretched from a universal template and not the same part as the full-size StroboStomp. It lines up around the screen and the footswitch, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e the footswitch stays fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Peterson StroboStomp Mini, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard protection:\u003c\/strong\u003e rigid acrylic against scratches and impacts, not a soft sleeve or a peel-off film.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Peterson StroboStomp Mini\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":55379025723721,"sku":"PYG-PSSM","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/il_fullxfull.8539088040_c5ef.jpg?v=1789714533"},{"product_id":"morningstar-mc4-pro-protector","title":"Morningstar MC4 Pro Acrylic Cover \u0026 Screen Protector","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear acrylic protection, laser-cut for the Morningstar MC4 Pro.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MC4 Pro fits four switches and a screen into a compact controller, and all of that surface is worth keeping clean. This hard acrylic shield helps guard its face and screen against scratches and knocks, in the studio, in transit and on stage. Unlike a thin film or a vinyl sticker, it is a rigid guard.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCut for exactly this device, nothing else.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery shield is laser-cut to the real measurements of the Morningstar MC4 Pro, not stretched from a universal template. All four footswitches stay free, so nothing gets in your way while you play.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this shield fits the \u003cstrong\u003eMC4 Pro\u003c\/strong\u003e only. It is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the standard Morningstar MC4.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy this shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull access:\u003c\/strong\u003e all footswitches stay fully usable with the shield in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fit:\u003c\/strong\u003e laser-cut specifically for the Morningstar MC4 Pro, no universal sizing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to remove:\u003c\/strong\u003e it attaches with small high-quality adhesive pads that are designed to come off later without residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard protection:\u003c\/strong\u003e rigid acrylic against scratches and impacts, not a soft sleeve or a peel-off film.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandmade in Bavaria:\u003c\/strong\u003e built one at a time and usually shipped within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x acrylic shield for the Morningstar MC4 Pro\u003c\/li\u003e\n  \u003cli\u003eA spare set of adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGood to know: this is a rigid hardware guard, not a soft case, not a padded bag and not a replacement screen. It protects the surface and controls of your device.\u003c\/em\u003e\u003c\/p\u003e","brand":"ProtectYourGear","offers":[{"title":"Default Title","offer_id":55637915664713,"sku":"PYG-MC4","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/9261\/2681\/files\/IMG_7622.jpg?v=1792159425"}],"url":"https:\/\/www.protect-your-gear.com\/collections\/gifts-up-to-30.oembed","provider":"ProtectYourGear","version":"1.0","type":"link"}